2KBP08M-E single phase glass passivated bridge rectifier voltage: 800v current:2.0a features kbpm glass passivated chip junction high case dielectric strength high surge current capability ideal for printed circuit board halogen free mechanical data terminal: plated leads solderable per mil-std 202e, method 208c case: ul-94 class v-0 recognized halogen free epoxy polarity: as marked on body dimensions in inches and (millimeters) maximum ratings and electrical characteristics (single-phase, half -wave, 60hz, resistive or induc tive load rating at 25 c, unless otherwise stated, for capacitive load, derate current by 20%) symbol 2KBP08M-E units maximum repetitive peak reverse voltage vrrm 800 v maximum rms voltage vrms 560 v maximum dc blocking voltage vdc 800 v maximum average forward rectified output current ta =55 if(av) 2.0 a peak forward surge current single sine-wave superimposed on rated load (jedec method) ifsm 60 a maximum instantaneous forward voltage drop per leg at 3.14a vf 1.1 v rating for fusing (t < 8.3ms) i 2 t 15 a 2 sec maximum dc reverse current at ta = 25c rated dc blocking voltage per leg ta = 12 5c ir 5.0 500 m a maximum thermal resistance per leg (note1 ) rth(ja) rth(jc) 30 11 /w typical junction capacitance per leg at 4.0v,1mhz c j 25 pf operating junction and storage temperature range tj, tstg -55 to +150 note: 1. thermal resistance from junction to ambient and from junction to lead mounted on p.c.b. with 0.47 x 047" (12 x 12mm) copper pads rev.a1 www.gulfsemi.com
ratings and characteristic curves 2KBP08M-E rev.a1 www.gulfsemi.com
|
